U8D1-64 – Application of t Tests

For this discussion:

• Identify a research question from your professional life or career specialization that can be addressed by an independent samples t test.

• Indicate why a t test would be the appropriate analysis for this research question.

• Describe the variables and their scale of measurement.

• Discuss the expected outcome (for example, “The Group 1 mean score will be significantly greater than the Group 2 mean score because.”)

INTRODUCTION

In Unit 8, we will apply our understanding of t tests in an IBM SPSS assignment. As in Unit 6, you will use the Data Analysis and Application (DAA) Template to submit your assignment.

Testing Assumptions: The Shapiro-Wilk Test and the Levene Test

Recall from Unit 7 that two assumptions of the t test are that:

1. The outcome variable Y is normally distributed.

2. The variance of Y scores is approximately equal across groups (homogeneity of variance assumption).

The Shapiro-Wilk Test

In addition to a visual inspection of histograms and calculation of skewness and kurtosis values, SPSS provides a formal statistical test of normality referred to as the Shapiro-Wilk test. A perfect normal distribution will have a

Shapiro-Wilk value of 1.00. Values less than 1.00 indicate an increasing departure from a perfect normal shape.

The null hypothesis of the Shapiro-Wilk test is that the distribution is normal. When the Shapiro-Wilk test indicates a p value less than .05, the normality assumption may be violated, which can be problematic.

To obtain the Shapiro-Wilk test in SPSS, follow the step-by-step guide for t tests that is provided in the Unit 8 assignment. SPSS provides the Shapiro-Wilk test output for interpretation. A significant Shapiro-Wilk test ( p < .05) suggests that the distribution is not normal and interpretations may be affected. However, the t test is fairly robust to violations of this assumption when sample sizes are sufficiently large (that is, greater than 100 members).

The Levene Test

The homogeneity of variance assumption is tested with the Levene test. The Levene test is automatically generated in SPSS when an independent samples t test is conducted. The null hypothesis for the Levene test is that group variances are equal. A significant Levene test ( p < .05) indicates that the homogeneity of variance assumption is violated. In this case, report the “Equal variances not assumed” row of the t-test output from SPSS. This version of the t test uses a more conservative adjusted degrees of freedom ( df) that compensates for the homogeneity violation. The adjusted df can often result in a decimal number (such as df = 13.4), which is commonly rounded to a whole number in reporting ( df = 13). If the Levene test is not significant (that is, homogeneity is assumed), report the “Equal variances assumed” row of the t-test output from SPSS.

Proper Reporting of the Independent Samples t Test

Reporting a t test in proper APA style requires an understanding of several elements, including the statistical notation for an independent samples t test ( t), the degrees of freedom in parentheses, the t value, the probability value, and the effect size. To provide context, provide the means and standard deviations for each group. Warner (2013) also recommends reporting the 95% confidence interval (CI) for the difference in sample means. Consider the following example from Warner (2013, p. 213):

The mean HRs differed significantly, t(18) = −2.75, p = .013 (two-tailed). Mean HR for the nocaffeine group ( M = 57.8, SD = 7.2) was about 10 bpm lower than mean HR for the caffeine group ( M = 67.9, SD = 9.1). The effect size, as indexed by η 2, was .30; this is a very large effect. The 95% Unit 8 – t Tests: Application

CI for the difference between sample means, M 1 − M 2, had a lower bound of −17.81 and an upper bound of −2.39. t , Degrees of Freedom, and t Value

The statistical notation for an independent samples t test is t, and following it is the degrees of freedom for this statistical test. The degrees of freedom for t is n1 + n2 − 2, where n1 equals the number of participants in Group 1 and n2 equals the number of participants in Group 2. In the example above, there are 10 people in each group: N = 20 ( n1 = 10; n2 = 10), so the df = 18 ( n1 + n2 − 2). Warner (2013) recommends that the t test should not be conducted with groups of fewer than 10 members. The t value is a ratio of the difference in group means divided by the standard error of the difference in sample means. The t value can be either

positive or negative.

Probability Value

Appendix B (pp. 1056–1057) of the Warner text provides critical values of t for rejecting the null hypothesis. In the example above, with 18 degrees of freedom and alpha level set to .05 (two-tailed), the table indicates a critical value of ±2.101 to reject the null hypothesis. The obtained t value above is −2.75, which exceeds the critical value required to reject the null hypothesis. SPSS determined the exact p value to be .013. This p value is less than .05, which indicates that the null hypothesis should be rejected for the alternative hypothesis—that is, the two groups are significantly different in mean heart rate.

Effect Size

A common index of effect size for the independent samples t test is eta squared (η2). SPSS does not provide this output for the independent samples t test, but it is easily calculated by hand with the following formula: t2 ÷ ( t2 + df). In the example above, the calculation is (−2.75)2 ÷ [(−2.75)2 + 18] = 7.56 ÷ [(7.56 + 18)] = 7.56 ÷ 25.56 = .30. The effect size is interpreted using Table 5.2 in the Warner text (p. 208).

Confidence Intervals

Recall that confidence intervals (CIs) were introduced in Unit 2. Standard APA reporting of the independent samples t test should include the 95% confidence interval for the difference in sample means, which is provided in the SPSS output for the t test.

The Warner text provides a “Results” example at the end of each chapter for all statistics studied in this course. You are encouraged to review these examples and follow their structure when writing up Section 4, “Interpretation,” of the DAA Template.

Reference

Warner, R. M. (2013). Applied statistics: From bivariate through multivariate techniques (2nd ed.). Thousand Oaks, CA: Sage.

OBJECTIVES

To successfully complete this learning unit, you will be expected to:

1. Interpret SPSS t-test output and draw conclusions.

2. Articulate a research question, null hypothesis, and alternative hypothesis.

3. Analyze the application of t tests in your career.

[u08s1] Unit 8 Study 1 – Readings

Use your IBM SPSS Statistics Step by Step text to complete the following:

• Read Chapter 11, “The t Test Procedure.” This reading addresses the following topics:

◦ Independent samples t test.

◦ Paired samples t test.

◦ One-sample t test.

◦ Significance testing.

◦ SPSS commands.

◦ Reporting and interpreting SPSS output.

**We offer the best custom writing services. We have done this question before; we can also do it for you…**

The price is based on these factors:

Academic level

Number of pages

Urgency

Basic features

- Free title page and bibliography
- Unlimited revisions
- Plagiarism-free guarantee
- Money-back guarantee
- 24/7 support

On-demand options

- Writer’s samples
- Part-by-part delivery
- Overnight delivery
- Copies of used sources
- Expert Proofreading

Paper format

- 275 words per page
- 12 pt Arial/Times New Roman
- Double line spacing
- Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Delivering a high-quality product at a reasonable price is not enough anymore.

That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.

You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.

Read moreEach paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.

Read moreThanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.

Read moreYour email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.

Read moreBy sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.

Read more